Archive

Category Archives for "Compound Miter Saw"
1

How Wide Cuts You Can Make With 10-Inch Miter Saw? A Practical Handbook Of A Standard 10-Inch Miter Saw

Portable and conveniently functional, a miter saw gives a professional touch to any of your carpentry job. Whether you are a DIY or expert carpenter, a miter saw is a must-have tool that can make accurate angle cuts in all types of woodworks and many of your masonry or metal jobs. Just because miter saws are available in different shapes and sizes, choosing one that can provide exacting results in a powerful yet simple way is always crucial.

Understanding the word “size”

When it comes to a miter saw, the size originally indicates the diameter of the blade mounted on the saw. The size of the blade usually ranges from 7.25″ to 12″. How wide of a board a blade can cut typically depends on the size of the blade. The larger the size of the blade the wider portion of a board it should cut. In the market that sells miter saws, a debate over the supremacy and suitability of 10-inch and 12-inch saws is ongoing. So, common woodworkers as well as professionals often ask which one to buy: a 10-inch or a 12-inch miter saw?

What size board a 10-inch miter saw can cut?

A miter saw that uses a 10-inch blade can deliver right-angle cuts off a board that is 5.5″ wide, which should be sufficient for a piece of two-by-six lumber. The 10-inch saw can also cut a piece of two-by-four lumber at a 45° angle. A 10-inch saw can cut lumber or plywood up to 1.25-inch thick without causing disturbance to users.

Your guide to make the cut

A standard miter saw is typically a circular saw installed firmly on a hinged frame, so users can make precise vertical cuts repetitively either on angle or straight in lumber or small boards. With a standard 10-inch miter saw, the repetitive mode of action should be the key so that you can save time during your woodworking project.
You have to put the saw up in a specific location wherein you want to work. If you need considerably longer material cutting, it is recommended that you choose to work on a floor. However, an improvised work table or work bench can help you operate the saw quite comfortably.

Now, you should release the saw and place the stock on your saw bench so the blade can travel. If you are just a beginner, you can raise and lower your saw a few times before you turn it on. This way, you will be able to get familiar with how the blade will take its path when sawing through the stock. By doing so, you can avert accidents during the tedious hours of woodworking.

You can make perpendicular cuts through boards at angles which range from 45 degrees counterclockwise to 45 degrees clockwise. Do not worry about the alignment of the blade as the locking device and an angle scale will keep it as it should be.

Make sure you have clamps in place so that you can cut short pieces of stock safely. Try to cut near the end of a piece of lumber. This action makes it possible for the already cut pieces to be thrown. You should cut different angles on scrap material. Then, you can fit them nicely, so you can determine how the angles fit. Cutting at various angles will help you figure out basic shapes.

If you want to join a couple of stock pieces at a certain angle, the angle on the stock’s end should be half the joint’s angle. For instance, if you want to make a 90° corner, you must cut the ends of a couple of stock pieces at opposite 45° angles.

Making sufficient cuts using scrap material is a good practice that may help you avert unnecessary mistakes. If you are not working with a wide piece of stock, you may see the blade starts cutting the piece on its front edge. So, make sure you make measurement marks on the front edge of the piece. Alternatively, you can use an angle square to make marks on the piece.

Warnings to follow

  • Consider using eye and hearing protection tools.
  • Keep the workspace clear and electric cords in working condition.
  • Keep your hands away from parts that are on the move.
  • Avoid breathing in sawdust and try to disallow the accumulation of dust.

Should you use a 10-inch saw for your woodworking project?

Well, that depends on the requirements of your carpentry project, and of course, your own craftsmanship. If you are a Do-It-Yourself carpenter or just an average woodworker, a 10-inch miter saw will work well enough. Before you finalize your decision, go through the following benefits the saw can yield.

  • Both local and large hardware stores have large selections of 10-inch blades.
  • As physics suggests a 12-inch blade is likely to deflect and wobble more easily than a 10-inch blade. For little or no wobbles or deflection, a 10-inch blade is, in most cases, a good choice.
  • It is possible to achieve a high cut quality with a 10-inch blade that comes at a cheaper price than a 12-inch saw.
  • The cost of sharpening the teeth of the blade is another distinct matter. If you find that the teeth of your saw blade need frequent sharpening, a 10-inch is the more suitable of the two.
  • Being lighter than its larger counterpart, a 10-inch saw takes up little space.
  • The majority of these saws run on 110 power supply, indicating that you can easily plug it in wherever you need.
  • These saws are ideal for small cabinet shop or individual consumers.

When a 12-inch miter saw is more suitable?

As with any working tool or equipment, one thing is common that an average woodworker’s favorite saw may not be the desired tool for a professional carpenter. While a 10-inch miter saw is oftentimes a common carpenter’s favorite working tool, a 12-inch saw may prove to be more effective when it comes to wider and thick cuts. When an individual needs to use a miter saw for tasks or residential projects similar to industrial workshops, these saws are more convenient than their 10-inch counterparts.

Some instances showing when to use a 12-inch miter saw

  • If you want to force certain material over the 12-inch blade, it will not bog down like a 10-inch.
  • When you wish to rip into a piece of laminated lumber up to 2 inches of thickness, these saws will not disappoint you.
  • 12-inch saws are effective if a consumer wants a miter saw that is stable with an increased size and weight.
  • This saw can cut large sheets of plywood without requiring woodworkers to undergo much labor.
  • With added stability and increased number of teeth, 12-inch saws can cut more smoothly.
  • These saws are preferable when you expect both dependability and longevity.

What to expect from a 12-inch version?

If you need to have a cut of at least 6 inches, this version should do the job as you can expect to have a maximum cut of 7.5 inches which can be wide enough for a two-by-eight lumber. Larger and arguably more powerful, this saw can achieve a maximum thickness of 3.5 inches which can be good enough to cut through a four-by-four piece of lumber.
Once you feel comfortable with working, keeping the above discussion in mind; you can succeed in working with a 10-inch miter saw for your woodworking projects.

Incoming search terms:

  • 10 miter saw cutting capacity
  • 10 miter saw max cut
  • cutting capacity of 10 inch miter saw
  • Depth of bevel cut with a 10 inch miter saw
  • can i cut 3 moulding with a 10 miter blade
  • how wide of boards can the mastercraft 10in mitre saw cut
  • what size board will a miter saw cut
  • will a 10 miter saw cut a 4x4
  • miter saw cuts 4x4
  • miter saw with largest depth of cut

The Truth about Sliding Compound Miter Saw Reviews

What is a Sliding Compound Miter Saw?

What a sliding compound miter (or mitre) saw is can be derived from its names. It slides whatever it wants to cut into its saw blades. It’s also a miter saw because it’s capable of making accurate crosscuts and miters in any given work piece. That’s the beauty of it. Its name also described how it has evolved through the years.

As many sliding compound miter saw reviews would point out, the machine used to be a portable saw for two-by-fours. It then doubled in size and weight after its capacity and features were expanded significantly from its more lightweight early version. The new sliding compound miter saws have the ability to angle the blade in relation to both the fence and the table so that you can do compound angle cuts for crown molding and hip roof constructions.

Instead of the basic chopping motion you’d get from a “normal” miter saw that limited the cut size you can get out of your work piece by the diameter of the blade, the new-and-improved compound saws for miter cutting have something called a “powerhead” that slides along the rails, thus you’re getting radial-arm-saw-like functionality from the tool. This review, among many other sliding compound miter saw reviews, understands the importance of full disclosure.

Therefore, here’s what you should expect when it comes to the sliding compound miter saw. This is the type of saw that have a serious bite when it comes to effectiveness, so much so that the market for radial-arm saw (or radial arm saw) is being “strong-armed” by this new saw type.

Advantages and Disadvantages of Sliding Compound Miter Saw

The sliding compound miter saw is perfect for not just sawing for crown moldings and hip roof work pieces; you can also depend on it for cutting custom joints and stiles. Miter saws of the sliding compound variety are also dependable for angular cuts and delicate slices. You’ll see this pointed out many other sliding compound miter saw reviews.

However, it can’t do slices that table saws and radial-arm saws are capable of. Table saws rip wood and can make long strip cuts instead of angular ones and notching stiles in a stable platform. As for radial arm saws, they’re great for cutting up lumber or trimming them down to lengths that are actually usable for your construction needs. Miter saws are smaller and lighter than radial-arm saws.

What this means is that these tools have a reduced tendency of getting knocked out of alignment. Therefore, you can acquire more accurate cuts with miter saws even though it can’t do certain things that the more stable (but unwieldy) table saw and easy-to-use radial-arm saw can accomplish. These are common issues you’ll regularly see addressed in sliding compound miter saw reviews. These saws along with sanders, planers, shapes (or routers), and joiners are all the basic power tools you’d normally see in a woodworking furniture creation shop. Other saw types that you might come across are band saws and the drill press (for pilot holes and dowels), but these are expensive and aren’t absolute necessities.

Reviews of the Best Three Sliding Compound Miter Saws

Here now are some saw reviews on the best sliding compound miter saws around.

DEWALT DWS780 12-Inch Double Bevel Sliding Compound Miter Saw

What this piece of DEWALT equipment specifically offers that you won’t see in many other saws is its ability to make precise cuts without recalibration. The DWS780 is a miter saw that’s solidly construction and offers a system of cross-cut alignment that’s assured accurate because it makes use of an ultra-bright LED light that casts a shadow on the work surface that allows you to see where to cut without going out of alignment every time due to human error and whatnot. It’s also one of the most durable compound miter saws ever made, with double bevel sliding to boot (perfect for bevel cuts).

From the perspective of the average homeowner who does ordinary home improvement work, the tough, stainless steel miter is great for wannabe handymen out there because it should prove itself your “chop saw” of choice every time.

The XPS cross-cut system in particular is novice-friendly, although even pro handymen approve of this user-friendly utility. It’s one of the most versatile saws you’ll ever see. It’s ready to use from out of the box, is silent when it works, and it’s reasonably portable for a feature-rich, jam-packed miter saw.

It might have doubled in size and weight as a sliding compound miter saw compared to an ordinary miter saw, but that doesn’t mean it’s cumbersome in the least. It’s one of the most well-balanced saws you’ll ever get.

Read Our Detail Reviews Check price at Amazon.com

DEWALT DWS782 12-Inch Slide Compound Miter Saw

This version of the DEWALT Compound Miter Saw (the DWS782 versus the DWS780) shares many features. They’re both double-bevel sliding compound miter saws. They’re both ruggedly durable yet surgically precise when it comes to their cuts.

You can do delicate woodworking with the saws or go tough with deck building and heavy-duty framing. They’re both super-accurate portable saws for compound miter and double bevel cuts that many contractors, installers, framers, trim carpenters, and cabinetmakers require.

They’re bigger that regular miter saws, but they make up for the bulk with extra functionality, features, and benefits. You will love this saw compared to the (more expensive) DWS780.

This is because the DWS782 because it’s the lighter and more mobile saw. It also improves upon the offerings of the DEWALT DWS780 in terms of certain features such as a better and more efficient dust collection system that captures three-fourths more of the generated dust and a smaller size for improved productivity (it only weighs 56 pounds versus 67.6 pounds) even though it shares the same specs otherwise (like their powerful 15 amp, 3,800 RPM motors and three-year warranty deals).

Sure, the DWS782 lacks the “laser” (really, just a bright LED light that casts shadows) that makes the DWS780 more accurate in its cuts, but does that feature really make the DWS782 better than the DWS780? For many expert handymen, the “crutch” isn’t a necessary perk if you know what you’re doing.

Read Our Detail Reviews Check price at Amazon.com

Hitachi C12FDH 15 Amp 12-Inch Dual Bevel Miter Saw with Laser

The Hitachi C12FDH 15 Amp 12-Inch Dual Bevel Miter Saw with Laser has many things in common with the DEWALT DWS780 12-Inch Double Bevel Sliding Compound Miter Saw. Both have “lasers” that serve as your guideline for cutting that keeps you from veering off course and making a cut that’s out of alignment.

They are also capable of 12-inch dual compound cuts and miter cuts. They’re super-precise machines that provide smooth, accurate crosscuts and miters every time in a wide variety of work pieces and woodworks. Many woodworkers and carpenters know of DEWALT more than Hitachi, though.

You can always depend on the Hitachi Dual Bevel Miter Saw for dependable cuts for aluminum sashes, hardboard, soft fiberboard, decorative panels, crown moldings, plywood, and wood without the saw somehow biting against the surface and making a jagged cut. With that in mind, what’s the main difference between the DEWALT DWS780 and the Hitachi C12FDH aside from their make and model? It’s the cost-effective investment that you can get from the less-renowned Hitachi that makes it stand out. They’re virtually the same in every other aspect, so perhaps budget-wise Hitachi makes more sense (and saves you more cents).

Read Our Detail Reviews Check price at Amazon.com

Incoming search terms:

  • sliding compound miter saw reviews
  • best sliding compound miter saw 2016
  • sliding compound miter saw reviews 2016
  • best sliding compound miter saw
  • miter saw reviews
  • miter saw review
  • best sliding miter saw
  • c12rsh2 hitachi review
  • compound mitre coming off two different slopes
  • hitachi c12rsh2 reviews

Things You Should Know about Compound Miter Saw Reviews

You have probably read lots of compound miter saw reviews on the internet. Some encourage you to buy one while others are not. But before you buy this tool, you need to know first what it is used for; its different types, its pros, and cons and a whole lot more. Let’s start reviewing this tool.

What Is a Compound Miter Saw?

A compound miter saw is a type of saw that has a revolving vertical hinge which allows the cutter head and the blade to be tilted sideways. This tool allows horizontal and vertical angled cuts, as well as angled cuts in both planes which are essential in crown molding.

Types of Compound Miter Saw

There are two types of compound miter saw—the single and the dual bevels. These saws can make similar cuts.

  • Single Bevel—the first type is the single bevel. This type can only be tilted on one side. When using this type of saw, you need to flip the object before making a cut.
  • Dual Bevel—this saw doesn’t require you to flip the workpiece before cutting it out. It is because this saw can be tilted in both ways.

Advantages/Disadvantages of Compound Miter Saw

Just like any tool, a compound miter saw has its own advantages and disadvantages. But let’s talk about its advantages first.
The compound miter saw provides several benefits to its users. Some of the benefits include:

  • The tool is user-friendly. You can use the tool without a hassle. After reading the manual, you can use it without reading its content all over again.
  • The Width of Cut. One of its benefits is the thickness of the cut. This saw can make a thicker cut compared to other types of saw.
  • It can make a cross-cut. Since the hinge can be rotated, it is easier for you to make a cross-cut especially if you are using a sliding compound miter saw.
  • You’ll get to finish your work fast. Compound miter saws use electricity or power to cut tools. With this energy, you’ll get to finish your work within a day or two, depending on how big your project is.
  • The tool gives smooth cuts. Another great feature of this saw is it gives smooth cuts. No matter how tough the wood is, it can still create a smooth cut.
  • The quality of the miter gauge. Due to its rotating pivot, you can tilt the saw up to 45o. You can tilt it to the left if you are a leftie or you can tilt it to the right if you are right-handed. Meaning, this tool can be used by anyone.
  • Lock Feature. The compound miter saw is the only miter saw that has a lock feature. With this lock, you don’t need to readjust the tool from time-to-time while using the cutting equipment.
  • The tool can be rotated in different angles. Unlike other types of miter saw, the compound miter saw can be rotated in various angles. This is beneficial especially if the wood that needs cutting is quite huge.
  • It can be used in crown and base moldings. This tool is so versatile that you can use it in both crown and base moldings. You just need to install the right tool so you can use it to your project.
  • The cuts are precise and accurate. This equipment lets you have precise and accurate cuts. This will make your project look more professional than using other cutting tools.

Of course, nothing is perfect. Every tool has its flaws no matter how advantageous the tool is. Some of the disadvantages are as follows:

  • The tool needs electricity in order to function. If you are doing a project and the electricity has turned off, you can’t use the tool anymore. You need to wait for the power to get back before you can continue your project.
  • It creates a whole lot of mess. The tool doesn’t have a container where the wood dust and chips should go. You need to clean up the place after doing the project.

How to Choose the Right Compound Miter Saw?

Now that you know its pros and cons, it’s time for you to know for you to know how to select the right compound miter saw for you. Choosing the right compound miter tool depends on the type you want to get. If you want to get a 10” or 12” compound miter tool, you need to do the following tips:

  • Consider your budget. Though compound miter saws are quite expensive, there are still tools that produce the same end result at an affordable price. Choose a tool that is under your budget.
  • Know your cut requirement. If you only need vertical cuts, then choose the one that can produce this cut.
  • Look for a handy tool. Get a tool that is easy to bring so you can use it wherever you like.

As per the single or dual bevel, you need to do the following tips:

  • You also need to consider your budget when choosing a single or dual bevel. Get a tool that is under your price range.
  • Know the type of project you are going to make. If you are making a project that needs crosscutting, then this tool is the one that you should get.

Finally, don’t forget to read compound miter saw reviews whatever type you are using. These reviews will help you choose the best brand as they provide the price, as well as the pros and cons of the product.

Where to Buy a Cheap Compound Miter Saw?

There are lots of online and offline stores that sell this equipment. But if you want to get the best deals, then you should get it at Amazon.com. They sell this equipment at an affordable price and the best part is that the tool will be delivered to your home.

Best Compound Miter Saw

There are lots of compound miter saw brands that you can choose from. But only three brands stood out. Listed below are the top three compound miter saw brands that you can buy. Read this quick compound miter saw reviews for you to choose the perfect cutting equipment.

DEWALT DW715 15-Amp 12-Inch Single-Bevel Compound Miter Saw

The DEWALT DW715 15-Amp 12-Inch Single-Bevel Compound Miter Saw gives accurate and quick cuts. It has the powerful motor and great features, allowing you to cut a wide range miter-cutting and crosscutting applications. The tool has a robust carbide blade, a dust bag, and a blade wench.

 

Read Our Detail Reviews Check price at Amazon.com

Makita LS1040 10-Inch Compound Miter saw

The Makita LS1040 10-Inch Compound Miter saw is a very powerful tool. This cutting tool can be used in various wood projects such as framing, cabinetry, woodworking, deck building and a whole lot more. It has great features which provide a high-quality performance, making your project look elegant.

 

Read Our Detail Reviews Check price at Amazon.com

DEWALT DW716 15 Amp 12-Inch Double-Bevel Compound Miter Saw

The last on the list is the DEWALT DW716 15 Amp 12-Inch Double-Bevel Compound Miter Saw. Just like the DEWALT Single-Bevel Compound Miter Saw, this tool provides accurate and quick cuts to perform the job. The only difference is the lock features and fence which the first tool doesn’t have.

 

Read Our Detail Reviews Check price at Amazon.com

Summary

The compound miter saw is an ideal tool for any woodwork. With this tool, you can do framing, cabinetry, and many others. It has a rotational vertical hinge that allows you to tilt the head in both sides.

The tool comes in two types. But the most popular is the single bevel compound miter saw. This type can only be tilted to one side. But it is more affordable than the dual ones.

The dual bevel, on the other hand, can be tilted on both sides. The best thing about this tool is you don’t need to flip the object before cutting it. You just need to pass it through to cut the surface.

The tool provides lots of advantages, but it also has some disadvantages.  The great thing about this tool is it provides higher performance and better end result. The tool gives a finish look compared to other cutting equipment.

However, the tool needs electricity in order to run. If the power is out, you have to discontinue your work and finish it once the power is back on.

When choosing a compound miter cutting tool, you need to consider the price of the brand. Choose a tool that is in high-quality but still under your budget. You also need to choose a tool that fits your work for you to enjoy the benefits of the equipment.

You also need to consider where you want to buy the tool. If you want to save time and cash, the best place to get this equipment is through online. Online stores provide great deals and delivery services so you don’t need to go to the store just to get the equipment.

There are lots of reviews for compound miter equipment. Each one provides the product’s pros and cons. Read those reviews for you to get the best model for your crafting needs.

Incoming search terms:

  • compound miter saw
  • 12 miter saw pros and cons
  • 3 things you should not do on mitre saw
  • Miter saw pros and cons

Your Comprehensive Guide to Knowing More about HITACHI C10FCE2 10-Inch Compound Miter Saw

HITACHI has been smart enough in order to provide this great power tool, the HITACHI C10FCE2 10-inch compound miter saw. One should already know that the company does not settle for mediocre or low quality when it comes to their products such as miter saw. Thus, this should definitely be of the best quality.
When it comes to its features, one should also be rest assured that this product has nothing but the most impressive of features. But then again, one should not be surprised given the fact that Hitachi is widely known and considered to be the market leader when it comes to the development and the manufacture of quality and reliable power tools.
It is quite impressive that the company is still able to uphold its reputation and was still able to keep up with the current demands set for power tools. Indeed, it has continued its age old tradition of upholding top engineering and innovation on the most impressive and the most awesome power tools that have been carefully designed to guarantee accuracy, precision, and quality cuts.
In its but most conservative efforts to keep up with the competition, HITACHI was able to come up with yet another work of art power tool. This is the HITACHI C10FCE2 10-inch compound miter saw. This power tool has been designed to answer to the demands of the market as to finding power saw that would be able to promise precision cuts.


Check price at Amazon.com

With the best features and the qualities inherent in this item, one would be rest assured of the fact that you would be able to make miter cuts that are smooth and more precise. In fact, you would also be able to guarantee accuracy when it comes to making cross cuts as well.
Whatever project or work piece you may have, this miter saw is known also for its versatility as it can do well on almost all platforms including softwood, hardwood, aluminum fiberboards, plywood, plain wood and even more! You would definitely not have trouble at all if you worry as to the type of platform that it would be able to work on. This miter saw does everything that you can imagine!
It has a special miter that can be highly flexible so as it would be able to readily adjust to any angles or cuts that it will be making. It can even make a more intricate cut that is highly applicable for wood workers. In addition, its bevel angle has been highly appreciated as to its features as it is very easy to use. Indeed, when it comes to making perfect cuts on a more consistent basis, this product should be the right miter saw choice for you.

Advantage of Using This Product

When it comes to finding the many benefits and advantages to be derived from availing the HITACHI C10FCE2 10-inch compound miter saw, you would be rest assured that the advantages to be acquired here would greatly exceed its cost. The following are the advantages for this product:

  • It is easy to use
  • You don’t have to be a rigger to figure out how this is being done. It has the most user friendly features that you would be rest assured of the fact that you would right away be able to understand as to how it is being used.

  • It is handy
  • As compared to other miter saws, this product is particularly handy and that it is surprisingly lightweight. This gives more edge given the fact that it can be carried and brought around everywhere you go.

  • It is not loud
  • If you plan on making a DIY job, you will surely wake up the neighbors if you will be using a very loud miter saw. Not this one, though. This product is guaranteed to work with the best performance with the most minimal vibrations.

  • It has measurement indicators
  • You don’t have to worry about not being able to guarantee accuracy in terms of its measurement as this product comes with free measurement indicators that would help you make accurate cuts.

  • It is very durable
  • Even if this item will be used for years, one would be very well assured of its durability. It is quite unfortunate to note that most miter saw may fail in this area because they would not be able to guarantee that such miter saw will be in its top condition for years of continued use.

  • It has a purchase guarantee
HITACHIC C10FCE2 10-inch compound miter saw warranty

Covered by Hitachi’s 5-year warranty

The best thing about this product is that once you purchase it, you would be having a 5 year limited warranty. This means that should there be any unexpected damages, rest assured that your manufacturer would be able to guarantee of its great and quality condition.

These are the advantages that you would be able to have from HITACHIC C10FCE2 10-inch compound miter saw that every user would find it to be highly of crucial benefit.

Its Features

The great thing about this miter saw is that it has a great maneuverability. This means that with the key and vital features that are being listed for this product, such item may then be considered as one of the most popular miter saw ever introduced in the market.

  • Speed of motor
  • This is why this miter saw is highly being preferred. Its motor has a 1 amp power and at the same time, it is able to accommodate a no load speed for more or less 5,000 RPM.

  • It has a miter stop
  • This is the most convenient type of miter stop because it is thumb activated.

  • It has a great bevel range
  • HITACHIC C10FCE2 bevel range

    45 Degree Bevel

    As compared to other types of bevel, it range would range for up to 45 degrees to the left.

  • It has a carbide tooth
  • In order to ensure better usability of the product, it also comes with a 10 inched carbide tooth made of tungsten.

  • It has an extended flip fence
  • This product comes with a big flip fence that can be extended for up to 4 inches.

  • It includes other accessories.

This item also comes with a horizontal angle that is designed for comfort. It also has a table and a clamping system that is built in the item.

When it comes to its blade and motor, the C10FCE2 includes a very impressive motor with 15 amp. This is way better as such a motor is normally common for a 12 inch miter saw only. But since this is a 10 inch saw, one would be truly impressed of this product. Thus, it is all that you need and more in a very handy miter saw. Indeed, there is much to applaud for this product.

Who Needs This Product

Whether you are a framer, a carpenter or a wood worker, this product should be very much recommended for those who want to have precision cuts on their boards and accuracy when it comes to its measurements.

Customer Reviews

There are nothing but praises noted for the reviews on the product. One should know that when it comes to its assembly, it is very much easy to put up. In fact, it will not take longer than 5 minutes until one would fully be able to finish the whole item.
If one would try to start spinning the blade, one should experience no trouble at all when it comes to its vibration as it is very much minimal. In fact, it runs so smoothly that it feels like cutting on butter given the best anti vibe handle that it also has.
If one would notice its indicator, one would be able to observe that it is very thin. This would allow for a more exact measurement which is one good quality that is quite impressive for this product.

Click here to Read 710+ Reviews at Amazon.com

Conclusion

All in all, the HITACHI C10FCE2 10-inch compound miter saw is the best miter saw one would have. Given all the best features and the advantages that are provided for in this product, it is no wonder as to why a lot of craftsmen re very much keen on using this product.

Top 10 Miter Saws Check price at Amazon.com

Incoming search terms:

  • hitachi c10fce2 review
  • if you need only one miter saw which one c10fce2 or c12fdh

Know Your Miter Saw: Introducing DEWALT DWS780 12-inch Double Bevel Sliding Compound Miter Saw

When it comes to cutting perfect angles from any platform especially on wood, nothing should beat the precision and accuracy that is unique only to DEWALT DWS780 12-inch Double Bevel Sliding Compound Miter Saw. It has been considered to be the most perfect miter saw should you are looking for accuracy and precision in all types of products that are especially made of wood. This would include molding, trim, baseboard, crown, and even wainscoting.
It has the best features such as the XPS alignment system which is basically the reason why this miter saw boasts nothing more but accuracy in even making angled cuts. If you are also trying to make the perfect beveled cuts, you would be able to know that this miter saw from DEWALT is very much confident in claiming that it can make the highest quality of beveled cuts among any wood products.

Buy now at Amazon.com

Since this is a compound miter saw, there are a lot of people who are experienced in this field that will doubt the function of this kind of saw. See, most compound miter saws do have trouble when it comes to making beveled cuts. But since this miter saw challenges that notion and can even claim that it can be perfect beveled cuts, one should greatly be impressed of the ultimate quality and function of this compound miter saw.
Indeed, this miter saw has been considered to be the most effective compound miter saw ever introduced in the market today. And there are a lot of reasons as to why this is so. Its main function has been as impressive as it was able to successfully make the best cuts and make cutting to be more efficient as compared to other miter saws.
In addition, this tool has been keen on making quick cuts that are also accurate even though they can be cross cuts made out of wood. Given the right kind of blade to be used, it even has the capacity to even cut through other platforms aside from wood. In fact, it can even cut through plastics and in other types of materials that are made of aluminum.


Buy now at Amazon.com

There are a lot of features and qualities that you would be able to have from the DEWALT DWS780 12-inch Double Bevel Sliding Compound Miter Saw. The following would provide you a gist as to the major breakdown of the benefits and even the drawbacks that you would be able to have from this miter saw.

Advantage of Using This Product

For those who are wondering what makes this miter saw to gain better edge as compared to other mediocre miter saws, then it is about time that you need to know the following advantages that you would be able to achieve when it comes to availing of this great miter saw, the DEWALT DWS780 12-inch Double Bevel Sliding Compound Miter Saw:

  • It guarantees accurate alignments
  • All thanks to the feature of its special feature know as the XPS cross cut alignment function, there is no more worry for you to do all the hassle of making tedious realignments using a laser each time you will be changing the blade.
    There is a LED light located just behind the blade so it will be able to cast that perfect shadow which will make possible the making of perfect cuts in its most precise manner every time.

  • It has the most durable feature when it comes to design
  • We can’t help the fact that there are other users who would like to really make the most out of using their miter saws. To this extent, one would unfortunately affect the features and the function of such miter saw due to its intense wear and tear.

    The best thing about this miter saw is that it can very much handle such a challenge. From the looks of it alone, you can right away tell that the features and the design on this miter saw are guaranteed to really last. You can even check its stainless steel meter which is very much durable, its machine castings, and even its bevel system. You would be able to see that it has the best features that are surely meant to last.
    Use it and abuse it however you like, you would be amazed as to how tough this miter saw can be for you.

  • Its cutting surface is very much visible
  • This main feature guarantees the fact that your cuts using this miter saw will be well executed. Given the blade and the quality of its safety features, you would rest be assured that the cuts that you will be making in this saw will always be of flawless quality without even compromising the safety standards that it promises to its users.

  • It has numerous positive stop feature
  • Especially if you are about to dial in those most common angles such as the 45’s or the 22 and ½’s, it would greatly help if such miter saw would have a saw stop. This miter saw does all that and more as it has a multiple saw stop feature so that it would be able to make the most accurate cut in its fastest precision.

  • Combines best feature of cut and capability
  • You would also be amazed as to the fact that this item offers the most powerful and highly reliable 15 amp motor. Such motor is able to deliver high quality and accurate cuts which utilizes 3,800 RPM. This allows any user to cut any material with ease and precision.

  • It has an impressive warranty
  • This great power tool does not neglect the fact that it also requires a great warranty especially upon purchase. The DEWLAT DWS780 12-inch Double Bevel Sliding Compound Miter Saw is guaranteed by a 3 year period of warranty with a one year period of free service and maintenance. Moreover, it also comes with a 90 day money back guarantee.

Its Features

The reason why this product is highly recommended is basically because of the features that belong to this miter saw. You would be able to know that you have chosen the best given the list of features that come with this product:

  • Accurate Cut System
  • Its unique integrated feature of XPS cross cut positioning system allows user to not stress on making adjustments in the cut line for better ease and accuracy.

  • It has top power
  • With its 15 amp at 3,800 RPM from its motor feature, it is able to deliver utmost accuracy and power as well.

  • It has a reliable dust collection system
  • The best thing about the dust collection feature of this product is that it is able to capture a total of 75% of the total dust that is generated during cutting.

  • It has a carbide tooth
  • In order to ensure better usability of the product, it also comes with a 10 inched carbide tooth made of tungsten.

  • It has reliable support
  • This product is being supported with sliding fences that are tall which would help in providing better foundation during crown molding for up to 7 ½ inches. It also includes support for base molding for up to 6 ¾ inches which is being built against the sliding fence in order to make perfect bevel cuts.

  • It makes perfect cut templates
  • With the exclusive design of its back fence, it is capable of making perfect cuts at 2×16 dimension on a 90 degree and 2×12 dimension on a 45 degree.

In addition, the bevel scale of this miter saw allows better bevel angels which also ensures nothing but easiness and accuracy.

Who Needs This Product

This helpful tool is best when making DIY jobs at home. If you love to decorate your home with the best wood furnishings, this should be your perfect companion. Also, this is highly vital for men at work especially those who are carpenters, wood workers, and even carvers or artists.

Customer Reviews

For a compound miter saw, DEWALT has done it again as it ensures the best cuts with the best precision. It allows you repetitive cuts which you would surely need if you are into constructions. You can also rely on the power of its motor but you don’t have to worry about its durability and quality.
More and more customers find this product highly function and ever dependable. The only drawback that they have for this product is that it can be quite costly. But for a top performance such as this, it is definitely worth it.

Read 234+ Customer Reviews at Amazon.com

Conclusion

With the help of the DEWALT DWS780 12-inch Double Bevel Sliding Compound Miter Saw, you will be able to realize that making perfect and angled cuts from woods even at a repetitive manner will never be as easy as utilizing this handy power tool.

Top 10 Miter Saws More details at Amazon.com

Incoming search terms:

  • dws780
1 2 3
MjBjMWU0MmIyNjkzY2ZkMjdjZWUyNzZiOWMzYjdhNWU